Model E-40: Falling length: 40CM, steel case, using Somfy motor (Made in France), anti-vibration bearing and rubber cap, removable cradle.
Specifications
I. Case and structure
1) Enclosure size: 580 (width) x 480 (length) x 430 (height) mm
Close to the main line.One
2) Inside dimension: 555 (width) x 455 (length) x 300 (height) mm
3) Lower river way: 40 CM
4) Maximum loading weight: 10 Kg
5) Cover blade: 20 mm
6) Driving method: Slide method (motor - data base: wire rope)
7) Pore size: 610 (W) X 510 (D)
8) Material: STEEL 1.2T
9) Color: White powder coating
10) Bracket: Removable
11) Special Features
* Dustproof rubber - Prevents defects due to vibration during operation.
* Aluminum drums - Minimize weight and increase motor efficiency.
* Ball Bearing - Prevents the efficiency decrease due to friction during operation of the motor.
II. Motor
1) Model: 538R6 (SOMPY; France)
2) Nominal Speed: 14 rpm
3) Rated Power: 210w
4) Thermal Tripping: 150 ℃
5) Brake Type: Sliding
6) Shaft Drum: Aluminum
III. Switch
1) Product Name: Locus location (UP / STOP / DOWN)
2) Model: WOE-6310 (Woojin Electric; Electrical Appliance Safety Certification)
3) Certification number: SA02004-2005A (Industrial Technology Testing Center)
IV. What to make
1) Install an iron plate with a thickness of 2.5t or more on the top and bottom, and fasten the bolts to the corners. Insert a spring washer and bolt to prevent loosening during tightening.
2) HANGER A ring (EYE BOLT) is attached to the center of the top plate, and PANTOGRAPH TYPE GUIDE is connected to prevent shaking when driving and to prevent rapid descent by load.
3) The wire rope should be connected to the loop with 3 wire clips, and the bent part of the wire rope should be prevented from being bent using the THIMBLE
4) The front section of the wire rope should be wrapped with a tape to prevent loosening of the rope.
