Xin lỗi, Trình duyệt của bạn không hỗ trợ JavaScript!
Bạn hãy dùng những trình duyệt khác hoặt phiên bản trình duyệt cao hơn để sử dụng website tốt nhất!
Chào bạn...
Thingstron
CÓ MẶT KHẮP NƠI, THÔNG MINH và THÂN THIỆN VỚI MÔI TRƯỜNG

F - 2352SC

F-2352SC (12cm cone) Perfect for low power use, this speaker has increased cost-effectiveness. (recommended 2 to 4m)

•Because there is no back can, it can be mounted in ceilings even having minimal depth.

•Equipped with a diffuser for wide dispersion of high frequencies.

Specification

Rated Input

6 W (High Impedance)

Power Handling Capacity

Continuous pink noise: 9 W (8 Ω), 6 W (16 Ω)
Continuous program: 18 W (8 Ω), 12 W (16 Ω)

Impedance

100 V line: 1.7 kΩ (6 W), 3.3 kΩ (3 W), 10 kΩ (1 W), 20 kΩ (0.5 W)
70 V line: 830 Ω (6 W), 1.7 kΩ (3 W), 3.3 kΩ (1.5 W), 10 kΩ (0.5 W),
20 kΩ (0.25 W)
25 V line: 830 Ω (0.75 W), 1.7 kΩ (0.4 W), 3.3 kΩ (0.2 W), 10 kΩ (0.06 W),
20 kΩ (0.03 W)
16 Ω, 8 Ω

Sound Pressure Level

89 dB (1 W, 1 m)

Frequency Response

80 Hz - 20 kHz (-10 dB), 50 Hz - 20 kHz (-20 dB)
at installation in 1/2 free sound field
(Measured by installing the unit in the center of a ceiling.)

Speaker Component

High frequency: Balanced dome-type
Low frequency: 12 cm cone-type

Mounting Hole

φ200 mm (Maximum ceiling thickness: 37 mm)

Input Terminal

Push-in connector (Bridging terminal-2 branch type)

Usable Cable

600 V Vinyl-insulated cable (IV wire or HIV wire)
Solid copper wire: φ0.8 - φ1.6 mm (equivalent to AWG No. 20 - 15)
7-core twisted copper wire: 0.75 - 1.25 m㎡ (equivalent to AWG No. 18- 17)

Finish

Baffle: Fire-resistant ABS resin (resin material grade: UL-94 V-0), black
Rim: Fire-resistant ABS resin (resin material grade: UL-94 V-0), white, paint
Punched net: Steel plate, white, paint
Dust-proof bag: Artificial fiber, black

Dimensions

φ230 × 154 (D) mm

Weight

1.5 kg (including panel)

Accessory

Panel …1, Paper pattern …1

Option

Back can: HY-BC1
Reinforcement ring: HY-RR2
Anchor hanging bracket: HY-AH1 (HY-RR2 required)
Tile bar bridge: HY-TB1 (HY-RR2 required)
Trim ring: HY-TR1 (HY-RR2 required)

suport